00

Cart

HomeThread Converters for sandblasting nozzlesAbrasive flow reducer TA-CB3-50MM

Abrasive flow reducer TA-CB3-50MM

$150.00

Abrasive flow reducer  for fitting a 3/4″ NPSM threaded nozzle to 50mm / 2″  coarse threaded holder.

Weight 2 lbs
Dimensions 6 × 3 × 3 in
Nozzle Liner Material

Threads

50mm – Coarse -2"

SKU TA-CB3-50MM

Available on backorder

Add to wishlist Add to compare
SKU: TA-CB3-50MM Category: Tag:

Description

Most Abrasive flow reducer for small nozzles, converts to Contractor threads

Abrasive flow reducer. converts nozzles with 3/4″ npsm  male threads for use with nozzle holders with coarse 50mm female threads.  Reducer has a tungsten carbide liner for additional wear resistance.  Adapter steps down abrasive flow spread to match narrow entrances found on smaller nozzles. Examples of smaller nozzles with small entrances and 3/4″ NPSM threads  are  ATV, UT and Banana Nozzles.

We recommend that Banana nozzles use an abrasive  flow reducer /adapter to step down abrasive’s spread from hose I.D. dimensions to nozzle entrance size.  We do not recommend  using a thread converter on small nozzles  to make them fit a large  I.D. nozzle holder ( 1-1/4″ or  contractor threads).  A plain thread adapter will not reduce abrasive flow dimensions from hose to nozzle entrance and will mean that the grit will be hitting this nozzle entrance and cause excessive wear.

To adapt a small nozzle  with 3/4″ NPSM  threads to fit 1-1/4″ fine threaded holders see our TA-CB2-114 adapter.

Specs:

Model: TA-CB3-50mm

Sku: 754113

Threads: contractor

Liner: Tungsten carbide

 

Sandblasting Nozzle Threads:

Sand blasting nozzles are available with several thread specifications. The most common are:

  •  Most industrial blast cleaning nozzles in the USA have 1-1/4″ NPSM straight threads.
  •  Most industrial grit blasting nozzles outside North America have 2″ UNC, 50 mm / contractor threads.
  •  3/4″ NPSM threads are found on smaller nozzles for cabinet and spot blasting. These are straight threads not tapered.

 

Additional information

Weight 2 lbs
Dimensions 6 × 3 × 3 in
Nozzle Liner Material

Threads

50mm – Coarse -2"

SKU TA-CB3-50MM