Cabinet Gun Insert # 2
Cabinet Gun Insert # 2, made from tough tungsten carbide. This quality replacement sandblasting gun insert with a 0.50″ O.D. fits Skat style blast cleaning guns. This insert has a 1/8″ bore (needs equivalent air jet). Inserts are used in suction style cabinet blast cleaning guns for cleaning small parts either in a cabinet set up or in an open workshop environment. Blast cleaning using these style guns is for removing old paint, rust or other contaminants from a surface before applying a new coating. For more aggressive abrasives like aluminum oxide we have a Boron carbide version available BCI-SB35-2, Boron carbide offers a longer wear life than a ceramic or tungsten carbide.
Tungsten carbide Inserts O.D. 0.50
Why use Tungsten carbide replacement inserts/nozzles for siphon guns? They last longer and can result in increased blast cleaning productivity.
How do I know if this insert will fit my blast cleaning gun? Since there are many styles of siphon guns on the market it is important to identify correct replacement carbide tips. In this case, these parts work with guns that are “SKAT” Style. (Fits these gun assemblies S-35, C-35, S-25, and C-25.)
Additionally, check external dimensions of tip you are currently using, if O.D. = 0.50”. Length 1.563” (1-9/16”) as shown in picture below, then TCI-SB35 series should fit your gun.
Straight Bore: 1/8″
Material: Sintered Tungsten carbide
|Dimensions||1.563 × 0.50 × 0.50 in|