00

Cart

HomeTools for blast cleaning inside of pipesBoron carbide throat sleeve UBN-SB-BCSL

Boron carbide throat sleeve UBN-SB-BCSL

$104.00

Boron carbide throat sleeve, for Holloblast style pipe cleaning set ups (2″ to 12″)

Weight 0.22 lbs
Dimensions 2 × 2 × 2 in
UNSPC

SKU UBN-SB-BCSL

Available on backorder

Add to wishlist Add to compare

Description

Boron carbide throat sleeve for 2″ to 12″ Pipe ID – Holloblast style pipe cleaners.

Boron carbide throat sleeve is used on throat rod. Two throat sleeves are needed for each throat rod.  Each Boron carbide throat sleeve is same length.

Boron carbide lasts longer than tungsten carbide due to its superior wear properties over a wide range of abrasives.

Tungsten carbide  throat sleeve are also available.  Tungsten carbide is a tough material and will hold up well in situations where the part is likely to be impacted during use.

Throat rod holds the deflector tip on holloblast style cleaning tools.  Boron carbide deflector tip is UBN-DFT-BC

 

One of the most difficult blast cleaning operations is the internal bore of a pipe/tube. Pipes come in a many different I.D.’s from small e.g. 1/2″ I.D. to many feet wide.  There are different machines available for doing cleaning work on the large bores. Nearly all these machines  are expensive and difficult to maintain.  We can help with some of the maintenance cost by having available a number of replacement carbide wear parts. Contact us for more information.
In some cases the I.D. of a tube is so small that it is difficult to find a nozzle small enough to fit the I.D. We may be able to help with our lance style nozzles that have a small O.D. Please see our MAC 4 nozzles to see if these will work with your application.

We also offer a range of nozzles for cleaning I.D. of  heat exchanger tubes from 1/2″ I.D. to 1″ or more. Please see our HE-X range of nozzles.

Additional information

Weight 0.22 lbs
Dimensions 2 × 2 × 2 in
UNSPC

SKU UBN-SB-BCSL